NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 1 (2007-01-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 2 (2007-04-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 3 (2008-02-29)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 4 (2008-04-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 5 (2008-05-13)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 6 (2008-06-03)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 7 (2008-07-09)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 8 (2008-08-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 9 (2008-09-16)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.10(2008-10-17)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.11(2009-01-19)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.12(2009-03-04)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.13(2009-03-30)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.14(2009-05-25)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.15(2009-07-27)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.16(2010-02-01)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.17(2010-02-08)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.18(2010-03-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.19(2010-10-25)

BATT - Batteries

IEC 60896-21 ed1.0 (2004-02)
Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

IEC 60896-22 ed1.0 (2004-02)
Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements

IEC 60086-1 ed11.0 
Primary batteries - Part 1: General

CABL - Cables and Cords

No new IEC Standard(s)

CAP - Capacitors as components

IEC 60252-1 ed2.0 (2010-09)
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

CONT - Switches for appliances and automatic controls for electrical household appliances

IEC 60691-am2 (2010-02) Ed. 3.0
Amendment 2 - Thermal-links - Requirements and application guide

IEC 61508-1 ed2.0 (2010-04)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements

IEC 61508-3 ed2.0 (2010-04)
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements

IEC 60730-2-9-am1 ed3.0 (2011-02)
Amendment 1 - Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls

Back to the top

ELVH - Electrical Vehicle IEC 61851-1 ed2.0 (2010-11) Electric vehicle conductive charging system - Part 1: General requirements IEC 61851-21 ed1.0 (2001-05) Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply IEC 61851-22 ed1.0 (2001-05) Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station IEC 62196-1 ed1.0 (2003-04) Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. Back to the top

 

EMC - Electromagnetic Compatability

IEC 61326-2-1 ed1.0 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

IEC 61326-2-2 ed1.0 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61000-6-3-am1 ed2.0 (2010-12)
Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

IEC 61326-2-3 ed1.0 (2006-07)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

CISPR 24 ed2.0 (2010-08)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

IEC 61000-6-4-am1 ed2.0 (2010-12)
Amendment 1 - Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

IEC 61204-3 ed2.0 (2011-06)
Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

IEC 61812-1 ed2.0 (2011-05)
Time relays for industrial and residential use - Part 1: Requirements and tests

CISPR 14-1-am2 ed5.0 (2011-07)
Amendment 2 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

IEC 61000-3-12 ed2.0 (2011-05)
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and = 75 A per phase

HOUS - Household and similar equipment

IEC 60335-2-90-am1 (2010-07) Ed. 3.0
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens

IEC 61770 (2008-07) Ed. 2.0
Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets

IEC 60335-2-25 ed6.0 (2010-09)
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-37-am2 ed5.0 (2011-05)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers

INST - Installation accessories and connection devices

IEC 61058-2-1 (2010-11) Ed. 2.0
Switches for appliances - Part 2-1: Particular requirements for cord switches

IEC 61058-2-5 ed2.0 
Switches for appliances - Part 2-5: Particular requirements for change-over selectors

IEC 60884-2-7 ed1.0 (2011-02)
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets

IEC 61210 ed2.0 (2010-08)
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

IEC 60670-24 ed2.0 (2011-03)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment

IEC 60670-1-am1 ed1.0 (2011-03)
Amendment 1 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

LITE - Lighting

IEC 62560 ed1.0 (2011-02)
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications

IEC 61347-1-am1 ed2.0 (2010-07)
Amendment 1 - Lamp controlgear - Part 1: General and safety requirements

IEC 61347-2-12-am1 ed1.0 (2010-09)
Amendment 1 - Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)

IEC 60238-am2 ed8.0 (2011-02)
Amendment 2 - Edison screw lampholders

IEC 60432-3-am2 ed1.0 (2008-04)
Amendment 2 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)

IEC 60064-am3 ed6.0 (2005-03)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064-am4 ed6.0 (2007-02)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60357-am1 ed3.0 (2006-04)
Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357-am2 ed3.0 (2008-10)
Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357-am3 ed3.0 (2011-01)
Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60400-am1 ed7.0 (2011-04)
Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60838-1-am2 ed4.0 (2011-03)
Amendment 2 - Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60598-2-3-am1 ed3.0 (2011-04)
Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 61347-2-3 ed2.0 (2011-05)
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps

MEAS - Measurement, Control and Laboratory equipment

IEC 61010-2-030 ed1.0
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits

MED - Electrical equipment for medical use

IEC 60601-1-9 (2007-07) Ed. 1.0
Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-11 (2010-04) Ed. 1.0
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 60601-2-8 ed2.0
Medical electrical equipment - Part 2-8: Particular requirements for basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV

IEC 60601-2-23 ed3.0
Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment

IEC 60601-2-45 ed3.0
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices

IEC 60601-2-46 ed2.0
Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables

IEC 60601-2-49 ed2.0
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment

IEC 60601-2-4 ed3.0
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

IEC 60601-2-27 ed3.0 (2011-03)
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment

MISC - Miscellaneous

IEC 60519-1 ed4.0 (2010-11)
Safety in electroheating installations - Part 1: General requirements

IEC 60519-2 ed3.0 (2006-08)
Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment

OFF - IT and office equipment

IEC 62040-3 ed2.0 (2011-03)
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

POW - Low voltage, high power switching equipment

IEC 60947-1-am1 ed5.0 (2010-12)
Amendment 1 - Low-voltage switchgear and controlgear - Part 1: General rules

PROT - Installation protective equipment

IEC 60269-6 ed1.0 (2010-09)
Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems

IEC 60127-2-am2 ed2.0 (2010-06)
Amendment 2 - Miniature fuses - Part 2: Cartridge fuse-links

PV - Photovoltaics

No new IEC Standard(s)

SAFE - Saftey transformers and similar equipment

IEC 61558-2-8 ed2.0 (2010-06)
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes

IEC 61558-2-23 ed2.0 (2010-08)
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites

TOOL - Portable tools

IEC 60745-2-3-am1 (2010-11) Ed. 2.0
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

TOYS - Electric Toys

No new IEC standard(s)

HSTS - Hazardous Substances

No new IEC Standard(s)

TRON - Electronics, entertainment

No new IEC Standard(s)

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.

WITHDRAWN/REPLACED PUBLICATIONS

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.