NEW ACCEPTED IEC STANDARDS IN THE IECEE CB-SCHEME

GUIDELINES

The Member NCB(s) of the IECEE are the sole Organizations in conjunction with their associated CBTL(s), in the field of the IECEE operations, entitled to apply to operate the relevant IEC standard(s), edition(s) and amendment(s).

When National Differences exist against the relevant IEC standards, it is the responsibility of the Member NCB(s) to declare such status for each standard/edition(s)/amendment(s) and provide details of such National Differences by sending an email with the details to the IECEE Secretariat.

The Member Body is required to endorse the National Differences, Special National Conditions, Group Differences, by being copied in the email sent to the IECEE Secretariat. Regulatory Requirements shall be declared under the responsibility of the NCB.

IECEE Member NCB(s) are kindly requested to provide this information in electronic format (MSWord).

The Member NCB(s) “Scope Extension Request” can be declared/requested either by using the:

*Note: The Fast Track Extension request requires an application that shall be addressed to the IECEE Secretariat according to draft OD-CB2007 as applicable.

**Note: The Scope Extension request requires an application that shall be addressed to the IECEE Secretariat according to OD-CB2007 Part 5 or 7 as applicable.

For Member NCB(s) located in the same country where Regulatory Requirements, National Differences, Special National Conditions and Group Differences apply, it is the responsibility of the Member NCB(s) to coordinate, nationally, in order to provide the required information to the IECEE Secretariat once.

Of course the NCB must coordinate with their Member Body or the IEC National Committee to make sure that they are provided with the appropriate information.


Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 1 (2007-01-12)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 2 (2007-04-23)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 3 (2008-02-29)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 4 (2008-04-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 5 (2008-05-13)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 6 (2008-06-03)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 7 (2008-07-09)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 8 (2008-08-11)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No. 9 (2008-09-16)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.10(2008-10-17)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.11(2009-01-19)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.12(2009-03-04)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.13(2009-03-30)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.14(2009-05-25)
Previously accepted IEC Standards in the IECEE CB-Scheme - Just Published No.15(2009-07-27)

BATT - Batteries

IEC 60086-2 (2006-12) Ed. 11.0
Primary batteries - Part 2: Physical and electrical specifications

CABL - Cables and Cords

No new IEC Standard(s)

CAP - Capacitors as components

No new IEC Standard(s)

CONT - Switches for appliances and automatic controls for electrical household appliances

IEC 60255-1 (2009-08) Ed. 1.0
Measuring relays and protection equipment - Part 1: Common requirements

IEC 60255-151 (2009-08) Ed. 1.0
Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection

EMC - Electromagnetic Compatability

IEC 61000-4-16-am2 (2009-07) Ed. 1.0
Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

IEC 62153-4-11 (2009-08) Ed. 1.0
Metallic communication cable test methods - Part 4-11: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables - Absorbing clamp method

IEC 62153-4-12 (2009-08) Ed. 1.0
Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method

IEC 62153-4-13 (2009-08) Ed. 1.0
Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method

HOUS - Household and similar equipment

IEC 60335-2-30 (2009-11) Ed. 5.0
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

IEC 60335-2-59-am2 (2009-09) Ed. 3.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers

IEC 60335-2-2 (2009-12) Ed. 6.0
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

IEC 60335-2-27 (2009-12) Ed. 5.0
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

IEC 60335-2-29-am2 (2009-12) Ed. 4.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60335-2-41-am2 (2009-12) Ed. 3.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-13 (2009-12) Ed. 6.0
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

IEC 60335-2-73-am2 (2009-09) Ed. 2.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters

IEC 60335-2-74-am2 (2009-09) Ed. 2.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters

IEC 60335-2-35-am2 (2009-12) Ed. 4.0
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

IEC 60436-am1 (2009-09) Ed. 3.0
Amendment 1 - Electric dishwashers for household use - Methods for measuring the performance

IEC 60204-33 (2009-12) Ed. 1.0
Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment

INST - Installation accessories and connection devices

IEC 61995-2 (2009-02) Ed. 1.0 Bilingual
Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL

IEC 60364-7-717 (2009-07) Ed. 2.0
Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units

IEC 60364-5-56 (2009-07) Ed. 2.0
Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

IEC 60282-1 (2009-10) Ed. 7.0
High-voltage fuses - Part 1: Current-limiting fuses

IEC 60320-2-4-am1 (2009-10) Ed. 1.0
Amendment 1 - Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

LITE - Lighting

IEC/TR 62471-2 (2009-08) Ed. 1.0
Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

IEC 60400 (2008-07) Ed. 7.0
Lampholders for tubular fluorescent lamps and starterholders
Maintenance Result Date: 2011

IEC 61347-2-10-am1 (2008-11) Ed. 1.0
Amendment 1 - Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
Maintenance Result Date: 2011

IEC 60061-DB-12M (2005-05) Ed. 1.0
Lamp caps and holders together with gauges for the control of interchangeability and safety - 12-month subscription to online database comprising all parts of IEC 60061.

IEC 62384-am1 (2009-07) Ed. 1.0
Amendment 1 - DC or AC supplied electronic control gear for LED modules - Performance requirements

IEC 60838-1 (1993-02) Ed. 1.0
Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60064-am5 (2009-07) Ed. 6.0
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Maintenance Result Date: 2010

MEAS - Measurement, Control and Laboratory equipment

INo new IEC Standard(s)

MED - Electrical equipment for medical use

IEC 60601-2-1 (2009-10) Ed. 3.0
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV

IEC 60601-2-5 (2009-07) Ed. 3.0
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment

IEC 60601-2-18 (2009-08) Ed. 3.0
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment

IEC 60601-2-41 (2009-08) Ed. 2.0
Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis

IEC 80601-2-35 (2009-10) Ed. 2.0
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

IEC 60601-2-52 (2009-12) Ed. 1.0
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 62563-1 (2009-12) Ed. 1.0
Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods

MISC - Miscellaneous

IEC 60800 (2009-07) Ed. 3.0
Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation

IEC 62386-207 (2009-08) Ed. 1.0
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)

OFF - IT and office equipment

IEC 60950-1-am1 (2009-12) Ed. 2.0
Amendment 1 - Information technology equipment - Safety - Part 1: General requirements

POW - Low voltage, high power switching equipment

IEC 60947-4-1 (2009-09) Ed. 3.0
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

PROT - Installation protective equipment

No new IEC Standard(s)

PV - Photovoltaics

No new IEC Standard(s)

SAFE - Saftey transformers and similar equipment

IEC 60704-2-2 (2009-07) Ed. 2.0
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters

TOOL - Portable tools

IEC 60745-2-13-am1 (2009-07) Ed. 2.0
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws

TOYS - Electric Toys

No new IEC standard(s)

HSTS - Hazardous Substances

No new IEC Standard(s)

TRON - Electronics, entertainment

No new IEC standard(s)

NOTE:

If you have a received a request from the industry to certify for any additional IEC standard(s) that is not listed here, that you would like to add to the IECEE CB-Scheme, please send the IECEE Secretariat an email.

WITHDRAWN/REPLACED PUBLICATIONS

Copyright © IECEE 2007. All Rights Reserved.

If you have any questions and/or comments, please contact The IECEE Secretariat.